Product Details
Company Profile

Lithium Polymer 750mAh Battery 3.7V Lipo Batteries With Stable Performance

503048 Lithium Polymer Battery 750mAh 3.7V With Stable Performance

Product performance:

1. High working voltage for single battery cells

2. Pollution-free

3. Long cycle life

4. No memory effect

5. PCM inside with short-circuit protection function,over-discharge, over charge, over current protection

6. Good consistency, low self discharge

7. Light weight, small and customized size

8. Wide application for electronics and industry

Li-polymer Battery List

Type	Max Thickness (mm)	Max Width (mm)	Max Length (mm)	Voltage (V)	Capacity (mAh)	Weight (g)
Li-P401017	4.2	10.5	17.5	3.7	40	1.5
Li-P401020	4.2	10.5	20.5	3.7	50	1.5
Li-P401215	4.2	12.5	15.5	3.7	40	1.5
Li-P401230	4.2	12.5	30.5	3.7	120	4.0
Li-P401225	4.2	12.5	25.5	3.7	90	3.3
Li-P401525	4.2	15.5	25.5	3.7	110	3.7
Li-P402025	4.2	20.5	25.5	3.7	150	4.5
Li-P402030	4.2	20.5	30.5	3.7	200	5.8
Li-P431223	4.5	12.5	23.5	3.7	70	2.8
Li-P457585	4.2	75.5	85.5	3.7	3000	48.0
Li-P483030	5.0	30.5	30.5	3.7	380	6.6
Li-P501230	5.2	12.5	30.5	3.7	130	4.2
Li-P502030	5.2	20.5	30.5	3.7	250	6.0
Li-P503030	5.2	30.5	30.5	3.7	430	8.7
Li-P503040	5.2	30.5	40.5	3.7	550	12.5
Li-P503048	5.2	30.5	48.5	3.7	700	13.6
Li-P503759	5.2	37.5	59.5	3.7	1200	24.0
Li-P505062	5.2	50.5	62.5	3.7	2000	35.0
Li-P505573	5.2	55.5	73.5	3.7	2500	40.0
Li-P552035	5.7	20.5	35.5	3.7	350	6.5
Li-P552535	5.7	25.5	35.5	3.7	450	10.0
Li-P552730	5.7	27.5	30.5	3.7	380	6.6

Handling of tabs

The battery tabs are not so stubborn especially for aluminum tab.

Don’t bend tab.

Do not bend tabs unnecessarily.

Prohibition short circuit

Never make short circuit cell. It generates very high current which causes heating of the cells

and may cause electrolyte leakage, gassing or explosion that are very dangerous.

The LIP tabs may be easily short-circuited by putting them on conductive surface.

Such outer short circuit may lead to heat generation and damage of the cell.

An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the

battery pack.

Mechanical shock

LIP cells have less mechanical endurance than metal-can-cased LIB.

Falling, hitting, bending, etc. may cause degradation of LIP characteristics.

Performance Curves of Lithium Cell:

1.Lithium Cell Charge Curve (Charge at 1C)

2. Lithium Cell Discharge Curve (Discharge at 1C )

3. Lithium Cell Cycle Life Curve

Do you know Lithium Battery Maintenance Tips?

1. Don't let the first charge time reach 12 hours

When we buy products with lithium batteries, many store attendants will tell us that the first charge of lithium batteries must reach 12 hours. In fact, this statement is incorrect. The lithium battery has been activated at the factory, and the self-discharge rate of the lithium battery is very low, so we don't need to charge the lithium battery for the first time for a long time like the ordinary nickel-cadmium / nickel-metal hydride battery. The lithium battery can be used when it is fully charged. Generally, the lithium battery can reach the optimal state after 3 to 5 complete cycles of charging and discharging (from a full cycle to the end of use).

2. Don't use inferior charger

Many friends take great care of their digimon, but ignore the lithium battery. When choosing a charger, if you cannot use the original charger, you must choose a brand charger with a better quality and overcharge protection. Inferior chargers make lithium batteries "short-lived" in the light, and charge and explode the batteries in the worst.

3. Don't overcharge often

Over-charging for a long period of time will keep the battery inside always in an "exciting" high-temperature state, which is not good for lithium batteries and chargers. Therefore, the standard for charging is fully charged. If the charger does not have overcharge protection, it is likely that the lithium battery will become a small bomb.

4. Do not touch metal objects

The contacts of the lithium battery should be wiped frequently, but it should be noted that when storing and carrying the battery, the contacts of the battery do not need to be in contact with metal objects. This will easily cause the battery to short circuit and shorten the life of the lithium battery.

5. Do not use it often in high or low temperature environment

Batteries have their own working and storage environment. Long-term exposure to high and low temperature environments will have a negative impact on the use time and life of lithium batteries.

6. Don't use or charge for a long time

If for some reason, the digital equipment and lithium battery at home may be left unused for more than 3 months, it will require us to periodically charge a certain amount of electricity for the lithium battery and then save it (the amount of each charge accounts for the total battery Only 30% to 70% of the power is sufficient, depending on storage time and battery capacity).

7. Do not use a freshly charged battery immediately

The temperature of the battery just after charging is still very high. If it is immediately placed in DV and DC equipment, it will easily cause the internal temperature of the electronic equipment to rise rapidly, which will have a great impact on the life of the electronic components.

Product Tags:


*From:	Your email address is incorrect!
*To:	Godson Technology Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Lithium Ion Battery Emergency Light
Brand Name:	Godson or OEM
Model Number:	Li-Polymer Battery 503048 750mAh 3.7V
Place of Origin:	Guangdong, China (Mainland)
MOQ:	50PCS
Price:	Negotiable
Payment Terms:	T/T
Nominal Voltage:	3.7V
Nominal Capacity:	750mAh
Weight:	≈15g
Cycle life:	More than 500 times
Size:	5.03048mm