thermoplastic plastometer

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

Thermo Plastic Plastometer PP Material MFI MFR Testing Equipment Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other...

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

... material from the barrel of a plastometer under preset conditions of temperature and load. For melt mass-flow rate, timed segments of the extrudate are weighed and the extrudate rate is calculated in g/...

Brand Name:AI

Model Number:MFR

Place of Origin:China

Introduction: MFR Thermoplastics Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; It is suitable for testing fluorine plastic, nylon and other engineering plastics, it is also used to test polyethylene (PE), ...

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

Melt Flow Rate Testing Instrument for Plastic Material Flow Rate Analysis and Evaluatio Summary: According to the Standard of GB/T 3682—2000, XNR-450F is used to test under the high temperature, measure the melt mass-flow rate (MFR) and the melt volume-...

Model Number:MFR

Place of Origin:China

MFR ASTM D1238 Melt Flow Rates Tester Introduction: MFR ASTM D1238 Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ASTM D1238 Melt Flow Rate Tester is suitable for testing fluorine plastic, nylon and other ...

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

... barrel of a plastometer under preset conditions of temperature and load. For melt mass-flow rate, timed segments of the extrudate are weighed and the extrudate rate is calculated in g/...