fireproof toys testing equipment

Brand Name:YUYANG

Model Number:YYT009

Place of Origin:China

...Test Plate Simulate The Real Floor Description And Application: Simulate the real floor, to test the toys fall on the floor of the toys produced after the destruction and damage caused by the impact of whether the product meets the requirements dropped. Standards: EN71-1 Clause 8.5 Parameter: Model Number YYT010 brand YUYANG product Toys Testing Equipment...

Brand Name:YUYANG

Model Number:YYT030

Place of Origin:China

... the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety.

Brand Name:SKYLINE

Model Number:SL-S50

Place of Origin:CHINA

...the most onerous position with a mass of 50 kg+/-0,5 kg on its standing or sitting surface for 5 min. For toys labelled as not suitable for children 36 months and over, load the toy with a mass of 25 kg+/-0,2 kg. Place the toy on a 10°+/-1°slope in the

Brand Name:HTI

Model Number:TW-257

Place of Origin:,China(Mainland)

... by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor belt, the drive wheel until the toy speed of 2m/s

Brand Name:GESTER

Model Number:GT-M04-1

Place of Origin:China

.... Standards: EN-71-1 section 8.17.1 Test principle The catapult was placed into the mouth-actuated projectile toys. Add pressure of 13.8kPa ± 5% on the mouthpiece, lasts for 5 seconds, test a total of 10 times. Detecting whether the projectile through the

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Brand Name:BAXIT

Model Number:BXT-XS

Place of Origin:Shanghai, China(mainland)

...the surface of substrates under laboratory conditions, and evaluating the advantages and disadvantages of fireproof coatings by the weight loss of combustion and the volume of carbonization. Second, the main technical parameters 1. The dimensions of the

Brand Name:kingpo

Place of Origin:china

... intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion. Standards: EN 71-1

Brand Name:AI

Model Number:SLQ

Place of Origin:China Mainland

... requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard: -toys to be worn on the head: beards, moustaches, wigs, etc. made from

Brand Name:KINGPO

...Test Equipment For Toy Subsidiary Materials Toy Flammability Safety Test Apparatus Product information: This device is designed and manufactured according to ISO8124 toy safety combustion performance. Adopting the burner that conforms to ISO6941, this testing device is suitable for combustion performance testing of all kinds of toy...

Brand Name:HOOHA

Model Number:ZY6261-PC

Place of Origin:China

...Test Equipment , Water Fire Electrical Wire Tester Suitable standard: GA/ t537-2005 (Main wire system) fire retardant, fireproof, fire-resistant performance test method) and GB/T9978.1-2018 (part I: general requirements) experimental standards. Scope of application: it is applicable to the test of flame retardant, fireproof...