Product Details
Company Profile

Factory price SS316 20 feet 21-26CBM CIMC T3 T4 T11 T14 ASME standard ISO liquid food transportation tank container

Introduction to tank container:

Brand New ASME Standard T4 T11 ISO Tank Container
T4 20ft iso tank container, Full Frame Potable Tank Container,

which is widely used to transport kinds of liquid chemical medium.

The shell is 316 stainless steel, the frame is made of strong steel

Corten A or equal material, which are testing by LR.

Our T4 20ft iso tank container is designed as perASME standard,

and meeting IMO/IMDG, ISO, UN, CSC, TIR, UIC, TC, ADR/RID L4BN.

The Capacity has 19000L, 20000L, 21000L, 24000L, 25000L, 26000L.

parameter:

Specifications - T3-T14 iso tank container
Frame Dimensions (L x W x H)		6058,12192 x 2438 x 2591 mm
Nominal Capacity		25000,47000 litre (±0.75%)
Maximum Gross Mass		36000,75000 kgs
Tare Mass		3510,6200 kg (± 3%)
Design Temperature (Frame & Tank)		-40 to +130 °C
Pressure	Working	1.70 bar
	Test	2.65 bar
Material	Tank (Shell & Ends)	SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)
	Frame	SPA-H or equivalent
Insulation	Shell	Rockwool (50kg/m3) 50mm thick on aluminium foil.
	Ends	Glasswool (16kg/m3) thickness to suit on aluminium foil.
Steam Heating	6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted.
Manhole	500mm low profile, 8 point fixing with Super Tanktyt Lid seal.
Safety Relief Assembly	1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad.
Air Inlet assembly	DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad.
Top Discharge	DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad.
Bottom Discharge	DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain.
Thermometer	A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar.
Document holder	A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point.
Calibration	A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted.
Design Code	ASME VIII DIV. 1
Approval	IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3

Liquid storage tank container is widely used in industries for liquid transportation

on the road/ rail/ ship and storage.ISO tank container:
1. Inner layer - made of 6 or 8 mm thick Q235-B steel plate, compared with

ordinary 5 mm thick single-layer tank, the strength is greatly improved;
2.Outer layer - tempered glass fiber thickness of 4.0mm or more,

good compressive and seismic resistance. It has strong corrosion

resistance and corrosion resistance.
Unique technology is adopted between the inner and outer layers

to make it reach a gap of 0.1-1mm, so as to eliminate hidden dangers from the root.
Leak detector 24 hours to monitor, to prevent leakage caused by security risks.

Product advantages:
1: We can provide different sizes of tank containers from 20 FT to 40 FT, and can accept

customized any special tank containers.
2. iso tank containers, acid, soda, liquefied petroleum gas and other tank containers. Various

chemicals can be transported and stored
3. Our iso tank containers are mainly exported to Africa, Asia and South America, such as

Nigeria, Ghana, Kenya, Vietnam, Peru, etc. Our tank containers can also be exported all

over the world because our standard tank containers are of international standard.

Product pictures:

Product details:

Product Process

1). cutting materials for preparing oil tanks manufacture

2). rolling machines for circling

3). welding and NDT(non-defection test) inspection

4). re-circling after welding

5). outer vessel’s abrasive blasting and anti corrosive painting for outside surface

6). pipe connecting and assembly of inner vessel and outer vessel

7). valves installation

8). perlite filling

9). vacuum-pumping

10). final painting and ready for shipment

Certificate

Factory Tour:

FAQ:

1. Q: Are you a oil tank Manufacturer ?

A: Yes, professional factory in China,welcome to visit our factory.

2. Q: Which area have you tanks exported to ?

A: Singapore New Zealand ,America, Africa, Asia, South America and Australia

3. Q: Any advantage ?

A: We have professional engineer team and technical workers. We can supply

the one-stop service from machining to welding.Honesty, integrity, and

customer satisfaction is our goal, because we truly care

Product Tags:


*From:	Your email address is incorrect!
*To:	Henan Lishixin Logistics Equipment Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Liquid Tank Container
Brand Name:	LISHIIXN
Model Number:	LSXC20220401
Certification:	BV/SCS/TUV
Place of Origin:	China
MOQ:	1/unit
Price:	15200USD
Payment Terms:	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability:	300 unit
Delivery Time:	30 work days
Capacity:	25000L, 20m3
Weight:	10675kg
Design Temperature:	-40 to +130 centigrade
Tare Mass:	3510,6200 kg (± 3%)
Dimension(LWH):	6058,12192 x 2438 x 2591 mm
Max Working Pressure(MPa):	0.17 MPa, 0.4 MPa
Material:	316L/SAN50028-7/WNr 1.4402/1.4404
Marketing Type:	Hot Product 2022
Design Code:	ASME VIII DIV. 1