Edge Milling Mineral Wool Rock Wool Sandwich Panel Line

Mineral Wool Sandwich Panel Machine

he Sandwich Panel Production Line is composed of four (5) main sections, such as, STEEL DECOILER,ROLL FORMING MACHINE,EPS AND ROCK WOOL LOADER AND EDGE MILLING MACHINE,SANDWICH PANEL LAMINATOR,BLADE AND SAW CUTTING MACHINE,ROLLING TABLE.

The production line is 42000mm x 4000mm x 2350mm.

III . THE MAIN PARTS OF THE PRODUCTION LINE:

• DECOILER For roof rollers: 1Set.

• Type of Decoiler: Single shaft
• Width of coil: ≤ 1250mm
• Weight of coil: ≤ 6mt

• ROLL FORMING MACHINE : 2Set.

• Roller station for Flat panel: 8stands
• Roller material: GCr15 Alloy
• Driving and Transmission: 1.5kw Gear motor

5. ROCK WOOL LOADER AND EDGE MILLING MACHINE: 1Pcs.

• Type of milling: Milling round knife
• Numbers of miller: Left and right two piece
• Driving Motor Power: 0.75 Kw x 2

5. SANDWICH PANEL LAMINATOR WITH ROOF FRAME-9m: 1Pcs.

5.1 LAMINATING ROLLER:

• Rubber roller Diameter: 150mm
• Thickness of composite rubber layer: 10mm
• Number of rollers: 26 pairs

5.2 GLUE SPRAYING DEVICE:

• Number of pump: 4 sets (top & bottom each 2)
• Required Power: 0.37 Kw
• Flow volume of glue: 0 – 0.4 kg per pump
• Type of flow volume control: Frequency inverter
• Scale of glue: Adjustable

5.3 GLUE UNIFORMITY DEVICE: Speed of spreading: 80 times/min;

Required Power: 0.5Kw x 3;

Pneumatic piston lifting;

Position adjusting from front and back;

5.4 PLASTIC FILM COATING DEVICE: Conical push pin by wheel adjusting;

5.5 DUST SUCTION FOR WASTE:

• Type of suction: Blowing fan;
• Required Power: 2.2 Kw;

6. BLADE AND CIRCULAR SAW PANEL CUTTER: 1Pcs.

• Required Power 1.5 Kw x 2
• Thickness of Panel 40mm – 200mm
• Length of Panel 1200mm – 30000mm
• Movement of Cutter: 1800mm (cylinder distance)
• Type of operating: Touch screen and PLC
• Sliding rail: Linear bearing

7.Parts listing:

Zhangcheng machinery manufacture co.,ltd , is a professional and leader of metal sheet forming machinery and different sandwich panel machinery manufacturer. This practical experience of over 18 years has guided our product development toward the best possible cost-efficiency, very high reliability, advance technology application .
We also thoroughly appreciate the importance of quality service and fast response times regarding purchase, delivery and maintenance of production equipment.

We manufacture EPS, PU/ROCK WOOL Sandwich Panel Panel Production Lines since 2002. Z-Lock Panel for container house,cold room.Our factory is located at the jinshan Industrial, As the leading and reliable manufacturer of EPS, Sandwich Panel Machines, we are mainly engaged in the research & development of our products, machine manufacturing, plant designing, and talent training.  With our well organized and perfect customer service network. The Mineral Wool Sandwich Panel Production Line produced by Zhongji has achieved the strip cutting of 250mm thick of high-density mineral wool panel, automatic conveying, flip angle of 90.c , as well as the saw cutting , automatic staking and wrapping of the sandwich panel after production, and can produce different models of wall panels, roof panels, door panels and cold storage panels, etc. As the pioneer and manufacturer of EPS, Sandwich Panel Production Lines, we work hard to improve the quality of our products and services and develop new innovative ideas to keep pace with the current trend in high-end technology in this field; all in the bid to satisfy our valued customers requirements. We warmly welcome friends and all those interested in our products and services to visit our factory in Shanghai, China!