Horizontal Vibrating Fluid Bed Dryer 5.4M2 For Chicken Essence

Horizontal Vibrating Fluid Bed Dryer For Essence Of Chicken

Material is fed into the dryer from feeding port, under the action of vibrating force, material moves forward with the fluidized
state continuously along the horizontal direction. Hot air passes through fluid bed from bottom to up and does heat exchange with damp material. After the powder is collected by cyclone separator, damp air is exhausted out. Dried product is discharged from discharging port.

Fluid Bed Dryer Working Principle

The raw material is fed into the dryer from the feeding inlet and the material will continue moving along with the fluidized bed level under the action of vibration. The hot air passes through fluidized bed and carries out heat exchange with damp raw materials. The wet air is exhausted out by the cyclone separator and the dried material will be discharged from the discharge outlet.

Fluid Bed Dryer Features

1. . Raw material is heated evenly, heat exchange is fully, and large intensity of drying
2. .Use vibration motor as vibration source. It is smooth in running and convenient in maintenance. The noise is low and the life is long.
3. .The state of fluidization is uniform and no dead gaps and broken phenomenon. Therefore the dried, cool can be got.
4. .It is good in adjustment and width in field of application. The thickness of raw material and the speed of raw material to be moved inside the machine and the change of vibration breadth can be realized through steeples.
5. .It is small to damage the surface of raw material, so it can be used for raw materials that are easy broken. If the granule is not normal, the effect of process can not be effected.
6. .Because of adapting the structure of fully seat, it is effective to prevent from the cross pollution of raw materials and the working environment is clean.
7. .Basically the drying time is on average, the staying time is short, and the thickness of fluidized bed is also very short, 2-5cm.

Fluid Bed Dryer Charactaristics

♦Materials have been heated evenly, full exchanged the heat. It is a process of large intensity of drying.
♦ The vibration motor drive has been used, with the advantages of smooth operation, easy maintenance, low noise, long life
♦ It flows stability, with no dead angle and blown through phenomenon.
♦ It is adjustable, wide adaptation. The moving speed of the bed depth and the material in the dryer can achieve stepless adjustment by the changes of the amplitude.
♦ It makes small damage to the surface of the material, can be used for the drying of the fragile materials and will not affect the work results if the particles are irregular.
♦ It uses full closed structure; effectively prevent the cross-contamination of the materials and air, clean operation environment.
♦ Materials drying time is basic equality, residence time is short, bed depth is small, usually 2 ~ 5cm.

Fluid Bed Dryer Technical Parameters

Model	A	B	C	D	E	F	Weight(kg)
VFBD-3x0.3	3000	300	1350	900	430	1650	1250
VFBD-4.5x0.3	4500	300	1350	900	430	1650	1560
VFBD-4.5X0.45	4500	450	1550	950	430	1700	1670
VFBD-4.5X0.6	4500	600	1650	950	430	1700	1910
VFBD-6x0.45	6000	450	1650	950	430	1700	2100
VFBD-6x0.6	6000	600	1700	1000	500	1700	2410
VFBD-6x0.75	6000	750	1850	1000	600	1850	2340
VFBD-6x0.9	6000	900	2000	1000	600	1850	3160
VFBD-7.5x0.6	7500	600	1850	1000	600	1850	3200
VFBD-7.5x0.75	7500	750	2000	1000	600	1850	3600
VFBD-7.5x0.9	7500	900	2100	1000	600	1850	4140
VFBD-7.5x1.2	7500	1200	2500	1150	800	2050	5190
VFBD-7.5x1.5	7500	1500	2850	1570	800	2370	6426
VFBD-8x1.8	8000	1800	3250	1800	900	2700	8600

Model	Area of fluidized bed(M2)	Inlet air temperature(oC)	Outlet air temperature(oC)	Water evaporation(kg/h)	Vibration motor model	Vibration motor power
VFBD-3x0.3	0.9	70-140	40-70	20-35	YZS8-6	0.75x2
VFBD-4.5x0.3	1.35			35-50	YZS10-6	0.75x2
VFBD-4.5X0.45	2.025			50-70	YZS15-6	1.1x2
VFBD-4.5X0.6	2.7			70-90	YZS15-6	1.1x2
VFBD-6x0.45	2.7			80-100	YZS15-6	1.5x2
VFBD-6x0.6	3.6			100-130	YZS20-6	1.5x2
VFBD-6x0.75	4.5			120-170	YZS20-6	2.2x2
VFBD-6x0.9	5.4			140-170	YZS30-6	2.2x2
VFBD-7.5x0.6	4.5			130-150	YZS30-6	2.2x2
VFBD-7.5x0.75	5.625			150-180	YZS40-6	3.0x2
VFBD-7.5x0.9	6.75			160-210	YZS40-6	3.0x2
VFBD-7.5x1.2	9.0			200-280	YZS50-6	3.7x2
VFBD-7.5x1.5	11.25			230-330	YZS50-6	3.7x2
VFBD-8x1.8	14.4			290-420	YZS75-6	5.5x2

Fluid Bed Dryer Application

This dryer is widely used for drying, cooling, wetting of the products in the light industry, chemical industry, pharmaceutical industry, foodstuff, and etc.

Applicable Materials:

Boric Acid, Borax, Dihydroxybenzene, Malic Acid, Maleic Acid, Monosodium Glutamate, Oxalate, Potassium, Permanganate, Sesame, Pentaerythritol, HPAM, Hypha Protein, Sodium Sulfate, Sodium Borate, Plastic Archon, Catalyst, Baking Soda, Detergent, Quartz Sand, Bean Pulp, Edible Sugar, Refine Salt, Bean, Seeds, Mining Slag, Activated Clay, Compound Fertilizer, and etc.

Fluid Bed Dryer Flow

Fluid Bed Dryer Show

Contact Me

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.