High Breaking Capacity 5x20mm Ferrule Slow Blow Time Delay Ceramic Tube Fuse Link 4A 125VAC For White Goods

High Breaking Capacity 5x20mm Ferrule Slow Blow Time Delay Ceramic Tube Fuse Link 4A 125VAC For White Goods

Description

5×20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification,Standards:In accordance with IEC60127-1, IEC60127-3, GB9364.1, GB9364.3.

Product features

• Time-delay high breaking capacity
• 0.1 A to 30 A current ratings
• Ceramic tube, nickel plated brass end cap construction
• Halogen free, RoHS compliant, lead free

• Designed to International (IEC ) Standards for use globally

• High breaking capacity

• Meets the IEC 60127-2, Sheet 5 specification for Time-Lag fuses

Applications

Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits.

Primary circuit protection:

• LED and general lighting

• LED/LCD televisions

• Appliances and white goods

• Printers and peripherals

• Test equipment

• Power supplies

___________________________________________________________ Download________

Certifications

Specification

Dimension (mm)

	Without lead
	With lead

Operating Characteristics

Temperature Rerating Curve

Recommended Hand-Solder Parameters:

Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or Convection Reflow process.

Extra services

For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB:

Lead forming:
The distance C between cap flat surface and axial lead shall be greater than 1.0 mm.

PCB mounting:
The distance between PCB and fuse cap is recommended to be a minimum of 1.5 mm.

HOW TO IDENTIFY AND REPLACE A BLOWN FUSE

Step 1: Disconnect Device	In this step you will need to disconnect device that isn't working It's not so hard you just need to disconnect plug that goes to main socket I would also recommend to power off device first NEVER OPEN DEVICE THAT IS STILL CONNECTED TO MAIN!
Step 2: Locating Fuse	Fuses are usually at device input so look near power socket When you pulling fuse out pull it gently so you wont damage fuse or some components
Step 3: Testing Fuse	If you have glass fuse you can easily see if fuse is burned or not For ceramic types you will need continuity checker/multimetermmeter For continuity checker Put fuse on black and red lead and if you hear beep than your fuse is ok, if theres no beep fuse is burned For multimetermmeter Set multimeter to ohm setting (closest to 1Ω) and put one lead on each end of the fuse and look at the display If the meter shows a less than 1Ω then the fuse should be okay, if it show that theres no connection (on my multimeter is 1 on left side) then fuse is burned
Step 4: Buying New Fuse	Check one cap on fuse,PCB or manual for fuse ratings There should be written something like : T2A250V, F1A250V that's fuse rating T is for slow blow fuse and F for fast blow fuse 2A or 1A is Amperage rating its usually just number and A 250V is Voltage rating its number and V And then just measure the size of fuse In small electrical device is usually 5x20mm There are 5x20mm, 5x15mm, 6.3x32mm, 3.6x10mm, 5x25mm and 10x38mm

Aolittel Technology Co.,Ltd. , specilized in production of various fuse , fuse holder and associated Products with plant area 5,000 m² located in Dongguan city , which is widely known as World's Factory .

Our R&D consist of experienced engineers with rich occupational history from world famous brand .Our production depart always keep at least 200~300 well-trained workers ,as well as some freshman for backup . In addition, we have sevaral market investgation specilists to understand the present marketing trend (including new products/approvals/cost etc.) and cooperated with development engineers to keep up with times. Therefore, we can produce reliable products for customers with competitive price and fast delivery ! This is long-term basis so that our position will be invincible .

With advanced production equipment, strong production capacity, strong technical force, can efficiently provide customers comprehensive fuse selection solution.We won customers' trust with more than 10 years' experiences and strong technical support, welcome to inquiry us and let's talk more ! 

Based on our good reputation in the industry, we have formed good relationship with most of industry manufacturer, we are like-minded friends but not competitor .Hence,they asked us to expand their brand in right time with their support on price ,approvals,delivery,services etc. We are pleasure to provide customers their brand if our advantages provided can satisfied customers. 

Aolittel belong to member of global conglomerate named Hontac Technology (HK) Company LIMITED .Hontac contributed huge investment for china mainland since Hontac have invested about 10 factories and to be shareholder of these manufactuer, most of them is belong to protection components industry as well as finished products. Hope you have noticed product range is wide, products except for fuse and fuse holders are belong to these manufacturers and we are excuting joint sales policy according to Hontac headquarters. Main product filed is overcurrent production , overvoltage production components,over temperature protection components, PCB,etc circuit protection solution provider.Products through the CCC, CQC, VDE, TUV, UL, SGS, CSA, CUL, PSE, CE,KC certification, comply with ROHS environmental requirements.