500w flame tester

Brand Name:kingpo

Model Number:KP-FT04

Place of Origin:china

Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,GB/T 2408 500W Vertical Burning Test :UL94 5VA,5VB,IEC ...

Brand Name:PEGO Group

Model Number:HVR-4H

Place of Origin:China

... test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting ...

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

IEC60695-compliant 220V/50Hz Horizontal and Vertical Flame Tester with 50W and 500W Power Options This device is an IEC60695 horizontal and vertical flame tester (50W and 500W), including its applicable standards, application range, test sample ...

Brand Name:YUYANG

Model Number:YY312

Place of Origin:China

...Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W...

Brand Name:YUYANG

Model Number:YY312

Place of Origin:China

...Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W...

Brand Name:GOLD

Model Number:GD-VW-1

Place of Origin:China

... according to the international mainstream wire and cable flame retardant performance test standards (especially the VW-1 test method in the UL 1581 standard). The equipment is mainly used to evaluate the vertical combustion flame retardant performance of

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

...NF-2 needle flame tester is built to check how well your electronic products, plastics, and insulation resist fire. It imitates a small flame from a malfunction and lets you set flame height, burn time, and angle. This helps you see how your products might

Brand Name:ZL

Model Number:ZL-3028

Place of Origin:China

... Testing Machine Flame Tester Compliance Standards UL94 GBT2408 Technical Description The Horizontal Vertical Flame Tester is designed to test and assess the burning characteristics of plastic materials according to American UL94 standard and GBT2408. This

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

... and electronic products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame test and 1100 horizontal-specimen/ FT2 flame test on

Brand Name:SKYLINE

Model Number:SL816

Place of Origin:China

... or cable is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Product parameters 1.Stainless steel box, the height of

Brand Name:CHENGFENG

Model Number:CF9074

Place of Origin:China

...flame tester is suitable for testing the flame retardant performance of electronic components, electrical parts, mechanical components, injection molded parts and other electrical products. This machine simulates the small flames generated inside the product under fault conditions and assesses the fire hazard using simulation technology. The needle flame tester is composed of three parts: the needle flame...

Brand Name:KINGPO

Place of Origin:Mainland China

...Needle Flame Tester IEC Table Type By Small Flame IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied...

Brand Name:vouch

Model Number:5706

Place of Origin:CHINA

Cable Flame Tester of Bundle cable burner test machine Technical data: 1.)Model:5706 2.)Execute standard:GB18380.31.32 IEC60332-3-...

Brand Name:LAB TECH

Model Number:NFT

Place of Origin:China

...Flame Tester ---- Model NFT Introduction: NFT Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT Needle Flame Tester...

Model Number:LR-K003

Place of Origin:China

Brand Name:Lonroy

IEC 884 Needle-Flame Tester Flammability Test Equipment for Electric Components 700 ºC 1. The reference standard IEC 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, ...

Brand Name:AI

Model Number:VFT

Place of Origin:China

...Flame Tester is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: ISO 6941 Vertical Flame Tester...

Brand Name:HOOHA

Model Number:ZY6014P

Place of Origin:China

500W Flame Retardant Wire And Cable Combustion Testing Machine Anti Corrosion Scope of application: It is suitable for flame retardant test, such as flame retardant cable and flame retardant cable joint of mt818-2009 mine. Meet the standard: Design and ...

Brand Name:HAIDA

Model Number:HD-W821

Place of Origin:Guangdong, China (Mainland)

...Flame Tester Flammability Testing Machine For Fabric 26mm Test standard GB / T5456-2009,ISO6941 : 2003 Technical parameters Technical Index HD-W821 Control method 7-inch color touch screen, can set and display ignition time and flame spread time Machine size 410mm(W) X 900mm(H) X 380mm(D) Ignition time 0 ~ 999.9s can be set Flame spread time 0 ~ 999.9s can be set Flame angle 30 º& 90° Flame...

Brand Name:Haida

Model Number:6015-HD

Place of Origin:China

...combustion test equipment. Calibration Procedure Position the copper block 55±1mm above the needle flame burner. Ignite the flame; the time for the copper block temperature to rise from 100°C±2°C to 700°C±3°C must be 54±2 seconds to validate the

Brand Name:Daxian

Place of Origin:Guangdong, China

... The needle flame tester is suitable for testing the flame retardant performance of electronic components, electrical devices, mechanical parts, injection molded parts and other electrical products. This machine simulates the small flame generated ...