100kw 3 phase rectifier welding machine

Brand Name:zhiyao

Model Number:ZYL100

Place of Origin:China

100KW Rectifier welder Application range: This machine is suitable for the welding of rotor windings and fairing block lugs of micro motors. It can also be used for other similar plate and wire welding. With pre-pressure, maintenance, welding time, heat, welding method and other parameter settings for actual modification, with counting function, and can save a variety of workpiece parameters, easy to operate, the whole machine...

Brand Name:HWASHI

Model Number:WL-MF-90K

Place of Origin:China

... transformer is in small size but the output energy is large. Three-phase AC will be converted into DC after being rectified. Then the DC will be converted into medium frequency 1000 Hz square wave to be connected to primary welding transformer through the

Brand Name:HWASHI

Model Number:WL-MF-100K

Place of Origin:China

...Phase Medium Frequency DC Spot Welding Machine For Silver Contact And Copper Sheet DESCRIPTION of 100KVA PLC Controlled Three-Phase Medium Frequency DC Spot Welding Machine For Silver Contact And Copper Sheet Medium frequency inverter DC resistance control system: Refer to the following picture, the three-phase AC current has been rectified into DC. 1.High quality,high efficiency.98% power factor,three-phase...

Brand Name:techfly

Place of Origin:China

...welding, high-temperature diffusion welding and seam welding, etc. Compared with the power-frequency AC welding machine, it has a lower demand for the power grid. It can replace the high-energy-consuming power frequency spot welding machine and three-phase rectifier welding machine, which...

Brand Name:XWH

Model Number:D(N)B--160, D(N)B--200, D(N)B--250

Place of Origin:China

... stationary Spot Welding Machine is working on the 380V/50Hz three-phase AC power supply.By the three-phase rectifier, inverter technology and the feedback control system, to control the welding heat, pre-press time, the maintenance time and cease time,

Brand Name:TRINTFAR

Model Number:MD-20

Place of Origin:China

...using diodes and then chopped by means of IGBT’s into high frequency alternating current. This alternating current is then transformed by the welding transformer and again rectified. DC current is thus obtained at the secondary side in to the parts to be

Place of Origin:China

Brand Name:GY

Model Number:GY-100AB

100KW High Frequency Induction Heating Equipment For Surface Quenching Quick Detail: Name High Frequency Induction heating equipment GY-100AB Application Hot forging, hot fitting, smelting, surface quench, welding, annealing Work power 360V-520V Out power ...

Brand Name:Genor Power

Model Number:GNAW160

Place of Origin:China

...welding machine rare earth permanent magnet -Adopt intermediate frequency three-phase rectifier, has the advantages of smoothcurrent, good dynamic characteristics,fast response speed (1-3ms). It can meet different welding requirements,and is suitable for all kinds of acid electrode, basic electrode and argon arc welding...

Brand Name:RAMS

Model Number:RNW250E

Place of Origin:CHINA

RNW250E Petrol Welding Generators Medium Frequency Permanent Magnet MOQ:12units mixed model Description • applicability is wide and can be used as a major units of oil and gas pipeline construction, railway, municipal pipeline, chemical plants, power ...

Brand Name:ZTZG

Model Number:200kw

Place of Origin:China

Introduction Solid-state high-frequency welder can provide complete welding solutions for low carbon steel, high strength steel, copper, aluminum, stainless steel and other materials. High frequency power supply adopts AC - DC - AC frequency conversion ...

Place of Origin:Tianjin,China

Brand Name:GREWIN

Model Number:Custom ups Toroidal Transformer Manufacture For Audio Amplifie

Quick Details Usage: Power Phase: Single Coil Structure: Toroidal Coil Number: Autotransformer ups transformer use:: UPS power supply,amplifier audio,UPS transformer usage:: electronic,audio,instrument,rectifier,reactor Coil Number:: High Flux Density ...

Brand Name:XINRUI

Model Number:SJSZ65/132

Place of Origin:SHANDONG,CHINA

...welding rod extrusion machine PVC PROFILE MACHINE CAN PRODUCE MANY DIFFERENT KINDS OF PROFILE BY CHANGING MOULDS. Such as ,pvc waterstop,pvc pp pe welding rod ,windows frame,corner beads and so on. Location Indoors Temperature 0-45℃ Power 3-phase,380V±10%,50Hz Installed Capacity 100KW...

Brand Name:OEM

Model Number:MTC500A-1600V

Place of Origin:China

Thyristor Module MTC200-500 Power Electronics Semiconductor MTC500A-1600V Thyristor module MTC500-16 SCR module Chip and backplane electrical insulation, excellent temperature characteristics and power cycling capability, small size and light weight. ...