Solid Carbide Rod
Solid carbide rod is the most general shape of tungsten carbide
blank material for cutting tools. And for cutting tools
application, tungsten carbide grain size ranges from sub-micron to
nano, because small tungsten carbide size enables the cutting tool
with a very sharp cutting edge and very good wear resistance,
Betalent carbide grades most hot selling for solid carbides are
BT45, BT50, BT55, BT60, if there is any special application, all
Betalent carbide grades including fine to coarse grain size
tungsten carbide grade can be applied to solid carbide rod
Solid carbide rod size:
Betalent carbide keeps large quantity stock of standard carbide
rods as-sintered in 310mm or 330mm length, which diameter starts
from 4mm to 20mm. And because few customers need to use solid
carbide bars of which diameter smaller than 4mm and larger than
20mm, they are not included in Betalent carbide’s regular stock,
they are produced order by order. As far as production capability
concerned, diameter lower limit is 0.5mm, the upper limit is 50mm,
and length limit upper 1200mm, no strict lower limit.
Solid carbide production capability:
Betalent carbide can produce 20tons carbide rods per month.
Solid carbide quality ensure system:
Raw material: Betalent uses the top-level quality tungsten carbide
powder of the world from GESAC.
Strict production process control and good machines.
Strict quality control process, precise and comprehensive
inspection equipment including carbon sulfur analyzer, TRS tester,
Metallographic microscope(Check microstructure), coercive force
tester, cobalt magnetic tester, Rockwell hardness tester, Vickers
hardness tester, drop test device.
Betalent solid carbide rod target market: middle to top-level
|D (mm)||Tolerance (mm)||D h6 ground(mm)||D(mm)||Tolerance(mm)||D h6 ground(mm)|
|4.0||+0.2/+0.4||4.0||18.0||+0.3/+0.8||18.0||310 / 330|
|5.0||+0.2/+0.4||5.0||19.0||+0.3/+0.8||19.0||310 / 330|
|6.0||+0.2/+0.4||6.0||20.0||+0.3/+0.8||20.0||310 / 330|
|7.0||+0.3/+0.5||7.0||21.0||+0.3/+0.8||21.0||310 / 330|
|8.0||+0.3/+0.5||8.0||22.0||+0.3/+0.8||22.0||310 / 330|
|9.0||+0.3/+0.5||9.0||23.0||+0.3/+0.8||23.0||310 / 330|
|10.0||+0.3/+0.6||10.0||24.0||+0.3/+0.8||24.0||310 / 330|
|11.0||+0.3/+0.6||11.0||25.0||+0.3/+0.8||25.0||310 / 330|
|12.0||+0.3/+0.6||12.0||26.0||+0.3/+0.8||26.0||310 / 330|
|12.5||+0.3/+0.6||12.5||27.0||+0.3/+0.8||27.0||310 / 330|
|13.0||+0.3/+0.6||13.0||28.0||+0.3/+0.8||28.0||310 / 330|
|14.0||+0.3/+0.7||14.0||29.0||+0.3/+0.8||29.0||310 / 330|
|15.0||+0.3/+0.7||15.0||30.0||+0.3/+0.8||30.0||310 / 330|
|16.0||+0.3/+0.7||16.0||31.0||+0.3/+0.8||31.0||310 / 330|
1. Cut-to-length carbide rod can be customized.
2. All size can be h6 ground.
3. Size beyond listed above please inquire sales person for MOQ and
Relate Carbide Rod Products
Carbide Punch Rod
Ground Carbide Rod