Material elevator

Material elevator is a fixed mechanical conveying equipment, mainly suitable for continuous vertical lifting of powdery, granular and small materials, and can be widely used in feed mills, flour mills, rice mills, oil mills of various sizes , starch factories, grain depots, port terminals, etc. for the promotion of bulk materials.

Wide range
This type of elevator has less requirements on the types and characteristics of materials. It can not only elevate general powdery and small granular materials, but also can elevate more abrasive materials, with good sealing performance and less environmental pollution.
Good reliability
Advanced design principles and processing methods ensure the reliability of the whole machine operation, and the trouble-free time exceeds 20,000 hours. The lifting height is high and the hoist runs smoothly, so a higher lifting height can be achieved.
Long life
The feeding of the elevator adopts the inflow type, no need to use a bucket to excavate the material, and there is little extrusion and collision between the materials. This machine is designed to ensure that the material is less scattered during feeding and unloading, which reduces mechanical wear.
The conveying working principle of the material elevator is as follows: the hopper scoops up the material from the storage below, lifts it to the top with the conveyor belt or the chain, bypasses the top wheel and then turns down, and the material elevator pours the material into the receiving tank. The transmission belt of the belt-driven material hoist generally adopts a rubber belt, which is installed on the lower or upper driving roller and the upper and lower redirecting rollers. The chain-driven material hoist is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on the top or bottom, and a pair of redirecting sprockets on the bottom or top. The material elevator is generally equipped with a casing to prevent dust from flying in the bucket elevator.

FEEDBACK