Product Sizes: A(8.5''X11'') - 20 Sheets, B(11''X17'')- 20 Sheets,
A4(210mm X 297mm)-20 Sheets, A3(297mm X 420mm)- 20Sheets
1. Application This product is recommended with most color laser
copier printers, color Laser Printers for T-shirts, aprons, gift
bags, mouse pads, photographs on quilts etc.
2. Advantage
Customize Fabric with favorite photos and color graphics
Designed for vivid results on white or light-colored cotton or
cotton/polyester blend fabrics
Ideal for personalizing T-shirts, canvas bags, wool garment,
aprons, gift bags, mouse pads, photographs on quilts etc.
Transfer peels off easily with hot
Iron on with a regular household iron & Heat Transfer Press
machines
washable up to textile professinal standard.
3. Compatibility for Light Color Laser Transfer Paper It can be printed with some of color laser
printers, such as OKI C5600n-5900n, C8600-8800C,Epson Laser C
8500, C 8600, HP 2500 L, 2600, Minolta CF 900
9300/9500, Xerox 5750 6250 DC 12 DC 2240 DC1256GA,
CanonCLC500, CLC700,CLC800, CLC1000, IRC 2880 etc.
4. Printer Recommendations Printer Settings for optimal print quality: To
optimize print quality, printers should be set for photo print
quality.
Laser Printers Compatibility: It is designed to
work with most Laser printers.
5. Iron-on Transfer processing
A. Prepare a stable, heat-resistant surface suitable for ironing
on.
B. Preheat the iron to the highest setting, recommended ironing
temperature 200°C.
C. Briefly iron the fabric to ensure that it is completely smooth,
then place the transfer paper onto it with the printed image facing
downwards.
D. Do not use the steam function.Make sure that the heat is evenly
transferred over the entire area. Iron the transfer paper, applying
as much pressure as possible, When moving the iron, less pressure
should be given, Don't forget the corners and edges.
E. Continue ironing until you have completely traced the sides of
the image. This entire process should take about 60-70 seconds for
an 8"x 10" image surface. Follow-up by ironing the whole image
quickly, heating all of the transfer paper again for approximately
10-13 seconds.
F. Peel the transfer starting at the corner after the ironing
process.
6. Heat press machine Transfer processing.
a. Set heat press machine at 185°C, for 15--25 second using
high pressure.
b. Briefly heat the fabric for 5 second to ensure that it
is completely smooth.
c. Before transferring, cut out the motif without leaving a margin
around the edges.
d. Place transfer paper onto fabric with the printed image
facing downwards.
e. heat press machine at 185°C, for 15--25 second.
f. Peel off the back paper starting at the corner.
7. Washing Instructions
Wash inside out in cold water. do not use bleach. Place into the
dryer or do hang to dry immediately.
8. Material Handling & Storage
conditions of 35-65% Relative Humidity and at a temperature of
10-30°C.
