TOIP-16:16 E1 T1 TDM over IP,E1 over ethernet

16 E1 T1 TDM over IP,E1 over ethernet:TOIP-16

Product Overview:

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, TOIP-16 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 8~16 E1s and 5 GE electrical ports and 1 GE optical port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.

State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.

TOIP-16 could work together with other members in TOIP family such as TOIP-8, TOIP-4, TOIP-2, TOIP-1 etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1/T1 services. One particular application is to build E1/T1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use TOIP to provide legacy TDM services over wired or wireless Ethernet/IP network.

Features:

1.Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port

2.Support Ethernet spanning tree protocol which enable normal work and protection in ring and mesh topology, protection resume in short time

3.User-friendly Web server supported for easy setup and maintenance, alarm log provided

4.Support SNMP V1/V2 network management

5.Ethernet built-in layer 2 switch, support VLAN, comply with IEEE 802.3x, 802.1P

6.Provide two pluggable E1 cards, each card supports 8 E1/T1s

7.Point to point and point to multipoint supported

8.Stable E1 clock recovery, low jitter and wander

9.Low processing delay for E1 channels, high bandwidth usage efficiency

10.Resist to packet loss, with PCM frame synchronization protection

11.User definable encapsulation packet size for different application

12.Support Ethernet encapsulation and UDP/IP protocol encapsulation.

13.Support VLAN settings for E1 service and in band VLAN management.

14.Enough jitter buffer to resist packet delay variation (PDV)

15.Local Ethernet port throughput limiting, assuring E1 QoS

16.120ohm balanced E1/T1 port, RJ-45 connector, support 75ohm unbalanced port through outside converting cable.

17.Support cascade concatenate for more than 16 E1 ports

18.Software and hardware online