Transmission & Datacom ADSL2+ Tester

ADSL2+ Tester is an easy-to-use, hand-held advanced telecommunication tester that used for the installation, maintenance and measurement of ADSL2+ service. It supports the testing function such as parameter, error, DMM, PING/TRACE that related to ADSL2+ service, user register authentication and simulation MODEM on the ADSL2+ user’s line side. It also directly enables the engineers to verify, troubleshoot and evaluate the ADSL2+ service. It is the right tool for the job.

With the ADSL line,you can use the tester to carry out the following measurements:

Basic：

Line standard,

Frame structure,

Line connection.

Parameter：

Fast Bit Rates (FAST): Upstream and Downstream

Interleaved Bit Rate (INTL): Upstream and Downstream`

Max Bit Rate: Upstream and Downstream

Utilize Rate: Upstream and Downstream

Transmit Power: Upstream and Downstream

Line Attenuation: Upstream and Downstream

SNR Margin (Signal to Noise Ratio)Upstream and Downstream

Link：(Near and Far)

Loss of Power(LOP)

Loss of Signal(LOS)

Severe Error Frame (SEF)

Reed-Solomon Forward Error Corrections (FEC) INTL

Reed-Solomon Forward Error Corrections (FEC) FAST

Cyclic Redundancy Check (CRC) anomalies INTL

Cyclic Redundancy Check (CRC) anomalies FAST

No Cell Delineation (NCD) INTL

No Cell Delineation (NCD) FAST

Header Error Check (HEC) INTL

Header Error Check (HEC) FAST

Out of Cell Delineation (OCD) INTL

Out of Cell Delineation (OCD) FAST

Sever Error Second (SES)

Error Second (ES),

Bit Error(BE)

Alarm：

Downstream Transmit Speed Threshold

Downstream SNR Margin Threshold

Downstream Channel Threshold

Downstream Line Attenuation Threshold

Upstream Line Attenuation Threshold

DMT

SNR and Character bits allocation ( graphic format) under 256/512 DMT

PING testing

WAN PING testing：IP or domain ping testing, statistic Percentage of PING packet loss
LAN PING testing：IP PING testing, Find out the faultily connected PC and statistic Percentage of PING packet loss

Simulate ADSL CPE MODEM completely

Substitutes ADSL MODEM, SupportsBridge, PPPoE, PPPoA, MER, IPoA regulation to perform ISP simulation login and verify operation performance of the terminal equipments.

Real-time display rate and flux

DMM

AC, DC voltage

Loop feeding current

Round resistance

Line capacitance

Line insulation capacitance

Estimate line distance

Built-In Splitter

Test phone connection

Main Features

Comply with multi-standards: ITU-T G.992.1 (G.DMT), ITU-T G.992.2 (G.Lite), ADSL2（G.992.3）, ADSL2+(G.992.5）

Automatically fit for the ADSL line standards,real-time displayADSL line connection status

Support both WAN PING and LAN PING

Support replacing MODEM and simulating the whole process of login on Internet

High resolution backlight large LCD,Handheld design and easy-to-use

Built-in Li rechargeable battery and smart charger circuit.

High storages capacity, can store up to 70 groups of test results including settings and results information.

Various Voice alarm and LED indications

Upgradeable software via an integrated RS-232 interface

Test results uploaded, conserved and printed by PCManager Software

Support U-disk, Mouse and Keyboard with USB interface

Visit the internet with web browser

Specifications: