Product Name: conveyor belt repair adhesive (hx-939)
Conveyor belt repair adhesive is developed from high active
molecular material, which is a kind of single
Component, neutral, room temperature curable special repair
adhesive for conveyor belt, for rubber conveying
The tape can produce good adhesive force, high strength, strong
adhesion, fast curing, oblique
Facade repair does not flow. It is easy to operate, no need to
deploy, and can be used immediately,
It is a kind of special rubber for quick repairing of various
conveyor belts and rubber products.
Scope of application:
It is mainly used for repairing the partial damage of conveyor belt
and filling the cracks of conveyor belt
Mending, roller rubber sealing, vulcanized joint sealing, etc.
1、 Grind the repair place into a bevel with a tungsten steel
grinding disc, and fully roughen and dry it,
Remove dirt, clean with detergent and cool to dry.
2、 Cut one end of the repair glue, squeeze the cement to the repair
place, and scrape the cement with a scraper
Fill in the repair area, and then level it. (in case of air, the
effect will be affected)
3、 It can be used after standing for 1-2 hours (above 25 ℃)
The product can be dried and sealed at room temperature (25 ℃) for
It is recommended to use 5- 40and Rh 35-75% o
matters needing attention:
1. Try to avoid eye and skin contact with this product. If your
hands and clothes are stuck with this product, please
Clean with efficient cleaning agent. Not accessible to minors.
2. First aid measures: in case of eye contact, please wash with
clear water and see a doctor immediately,
3. After opening, it's better to use it up on the same day. If you
want to continue using it, you must keep it sealed.
4. Net weight: 500g each, single component. It can be used in
winter, and curing will be slow below 5 ℃.
Density (g / cm3) 1.350.05
Touch dry time (min)180
Extrudability (ml / min)80
Volatile content (%)4
Sagging properties (mm) < 1
Hardness: shore a-hardness (a) 305
Elongation at break (%)600
Tensile modulus (23/ MPA)0.4 (20lm)
Curing speed (mm / 24h) 3 ~ 5
Elastic recovery rate (%)80
Pollution properties none
Application temperature (℃) + 5 ~ + 35
Next item：Cold curing adhesive sc2020