Bazaar electric hoist system heavy work rate durable quality
Rated voltage: 230v~50HZ
Working coefficient: S320%10min
Input power: 900W
Rated lifting capacity: 300~500kg
Lifting height: 1-100m
Lifting speed: 10/5 (m/min)
Gross weight / net weight: 26/34 (G.w/n.w)
Cooling method: The motor is a fully enclosed self-cooling (two-way
fan) type motor, which ensures that the motor has sufficient
cooling air volume when in use. If an optional external fan is
used, the proper cooling direction must be ensured when installing
the fan. Motor cooling is achieved by a separate fan (forced
ventilation) that is not affected by machine operating conditions.
The corresponding use environment:
20 ° C < T ≤ 30 ° C 95%
30 ° C < T ≤ 40 ° C 55%
Meantime between failures: 8000-10000 hours
Equipment noise: 45dB
Design life: 25 years
Accessories: 6.0 wire rope, hook, counterweight, control receiver,
remote control transmitter reversing pulley.
The design content of this project includes the production of
electric hooks, control systems and line layout of the site within
the scope of the project.
Installation and commissioning, and respond to on-site appearance
requirements and energy-saving technology applications.
The electric hook of this project is equipped with an independent
power distribution system. Voltage 380/220V, power supply from the
low voltage of the dedicated power distribution room
2.1 The direction of the hook control circuit can be adjusted
according to the site conditions.
2.2 The specific position of each electric hook installation and
the position of the remote control receiver can be adjusted
according to the specific conditions of the site.
Whole, but must be based on the principle of not affecting the
appearance of the site and convenient operation and maintenance.
3.1 The production of electric hooks meets the requirements of
relevant national standards and is a fixed electric hook.
3.2 Electric hook with overload limiter.
3.3 Electric hook with guide rope.
3.4 Electric hook for remote operation, with remote control and
corresponding signal receiver, must ensure that the remote control
The place can operate in all directions.
4.1 Select the cable that meets the requirements according to the
power of the electric hook used.
4.2 All cables are placed in stainless steel protection tubes and
run along the columns or walls of the building and must not be
4.3 Protection of the cable The steel pipe is fixed to the column
or wall with a pipe clamp.
4.4 Wire ropes and cable wires will slip and must be selected for
wear-resistant materials and processed at the inlet and outlet.
4.5 The layout of the power lines is generally along the cable tray
to ensure the appearance requirements of the building surface.
V. On-site installation requirements
1. Local control: The hook is powered locally by the set button.
2. The shelf for installing the electric hook will be fitted to the
site after the company is ready, and it should match the shape of
the hook as much as possible.
So as not to affect the appearance.
3. The steering position of the wire rope is a fixed guide pulley.
4. All components fixed on the column or wall are fixed by
5. The electric hook and the mounting seat are welded together, and
the surface is welded and polished to ensure the appearance
6. Metal enclosures and brackets of electrical installations that
may be energized when normally uncharged and damaged by insulation
The protection wire is connected reliably.
7. The cross-section of the grounding wire is the same as the phase
and neutral sections, and the grounding resistance is less than 4
8. The electric hook installed on the top layer shall be provided
with protection devices such as rain protection, and the protection
grade is IP65.
9. Set lightning protection device in the distribution box.
Sixth, the system configuration is as follows
1. Select the lifting equipment with corresponding lifting weight;
the system equipment is all bolted for easy maintenance and
Spare parts, lifts are complete sets of equipment, including
reducer, upper and lower travel limit controller.
2, the main power control box
3, the center console control button box control
4. Guide pulley system
5, wire rope system
6, advertising suspension and weight hook
7, equipment shock absorption measures
8. Wire rope perforation hole guiding and positioning device