High Efficiency Pulp Machine Bamboo Fiber
Pulp Machine Application
Machine bamboo fiber is used for separating the light and heavy
impurities in waste paper recycling process,also making the
secondary breaking of the pulp from the hydrapulper,The screen
palte hole of the Single - effect fiber separator can be increased,
which improves the production capacity.
Pulp Machine Fiber Separator Introduction
Machine bamboo fiber is a combination of one sealed horizontal
hydrapulper and a light & heavy impurity remover. It adopts
drum and turbo structure so has higher efficiency.With compact
structure,high efficiency,it has functions such as pulp
beating,impurity removing ,coarse screening etc,thus simplifies the
process of dealing with wasted paper greatly, and reduces the
Pulp Machine Specification
|Production Capacity (t/d)||50-70||80-120||180-250||280-360||300-400||400-500|
|Concentration of Input Pulp(%)||2-4|
|Pressure of Input Pulp (Mpa)||0.15-0.20|
|Pressure difference (Mpa)||0.03-0.05|
|Power of motor (Kw)||45||55||75-90||160||200|
Pulp Machine Working Principle
Paper Pulp get into the cylinder shaped cabinet with a tangent
track and revolve in high speed with the
impulse of pressure difference and revolving cutter. Then in the
effect of hydraulic shear force , friction of fibers and the
beating of blades, the pulp is defibered.
The pressure difference between sieve plates and drive impulse of
cutters make The defibered pulp go through the screen holes on
sieve plates and go out from accept outlet.
The pulp which can not go though sieve plates revolve rapidly in the cabinet and generate strong centrifugal force, which
together with the difference of proportion make the heavy impurities , fiber and light impurities
radially stratified. Heavy impurity, fiber and light impurities at
the same time move to the section far away from sieve plates with the push of cutter blades.
Heavy impurities move along the inside wall of cabinet to tangent
outlet and go into heavy impurity cleaner. After the cleaning of heavy
impurity, pulp will go out from
cleaner regularly and get into fiber separator again from pulp
inlet; Light impurities have small proportion ,they are concentrated in the central part and go out
continuously from central outlet.
when pulp move to end cover, it will flow back to cutter and go
through sieve plates again.