FTTH/FTTB/CATV Custom Size Heat Shrink Fiber Optic Splice Protector
Fusion Protection Sleeve
We are manufacturer of Fiber Optic Splice Sleeve is a combination
of transparent plastic tubing and a stainless-steel rod that is
ideal for safeguarding fusion fiber optic splices in field and
factory operations. It is designed for wall-mount, aerial
strand-mount, pedestal, underground, strand-mount and pole-mount
Transparent plastic tube with stainless-steel rod
Fiber Optic Splice Sleeve are manufactured using state of the art
machines and controlled manufacturing environment
Fiber Optic Splice Sleeve
Applications Aerial Strand Mount, Pedestal, Pole Mount, Strand
Mount, Underground, Wall Mount
Compatible With BTI, CTB-FTB, FDST, PBO, PBPO
Indoor/Outdoor Indoor, Outdoor
Product Type Accessory
Solution for Access Network: FTTH/FTTB/CATV, Access Network: xDSL,
Long-haul/Metro Loop Network: Outdoor, Wireless Network: Backhaul
Splice Type Single Fusion
Brand/ Origin: China
– Protection Sleeves Lenght:35mm; 40mm, 45mm , 50mm , 55mm , 60mm,
– Steel needle Diameter: 1.0mm,1.2mm,1.5mm (Standard Single Fiber)
– Custom lengths available
– No influence on the fiber’s transmission
– Splice point protection and intensity improvement
– Easy operation and reduction of the risk of manging fiber
– External tube clearly showing the status of connection
– Airproof configuration keeping the splice point’s good resistance
of humidity and temperature
– Operating terperature ranging from -45℃ to 100℃
Fiber splice sleeve is composed of a steel strength member, inner
fiber tube and outer shrink tube, two clear outer tubes for viewing
the color of the optical fiber itself.These sleeves are designed to
fit smaller width splice trays while still accommodating both 250_m
and 900_m fibers.
Sleeves are manufactured using state of the art machines and
controlled manufacturing environment in an ISO 9001 certified
Outer tube conforms to MIL-I 23053/5 class 2 standards.
A choice of strength member (stainless steel) provides additional
rigidity to prevent micro bending or breakage of the fiber ；and the
advantage of just one aperture to prevent misalignment.This single
opening provides greater assembly accuracy and repeatability and
prevents the misplacement of the fiber. The EVA inner tube that is
visible at each end of the splice sleeve. Flexible pinless splice
sleeves are also available.It can reconstruct overlay fiber and can
provide good mechanical strength at the junction,to ensure good
optical transmission properties.
Strength member is made from “”Full hard”” stainless steel of 304
grade and is ground at the edges before polishing to make it
completely burr free to avoid rupturing during shrinking. 304 grade
gives better corrosion resistance, even in coastal environment.
Resistant to heat shocks, no cracking dripping or flowing.
Our fiber optic fusion splice protector sleeves have good
performance of moisture-proof and environmental .And they are
protectionare compatible with all splice sleeve ovens and trays
,providing maximum lasting protection for splicing fiber in any
Long term proven performance, exceeds industry standards with
Product features: designed by the cross-linked polyolefin, hot-melt
pipes and reinforced stainless steel fiber components to connect
1. does not affect the photoconductivity of optical fibers.
2. protect the connection point and improve the mechanical
3. easy to operate, reduce the risk of damage to the optical fiber
4. transparent sleeve makes the condition of the optical fiber
5. the sealing structure to connect with good temperature and
|Splice Protection Sleeves||Fusion Tube||Steel Rod|
|O.D.after recovered (±0.1mm)|
1.When can I get the price?
We usually quote within 24 hours after we get your inquiry. If you
are very urgent to get the price, please call us or tell us in your
email so that we will regard your inquiry priority.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our
3.How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the
samples will be ready for delivery in 2-4 days. The samples will be
sent to you via express and arrive in 4-8 days. You can use your
own express account or prepay us if you do not have an account.
4.What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place
the order. Generally speaking, production lead time is within 2~4
5.What is your terms of delivery?
We accept EXW, FOB, CIF, DDU etc. You can choose the one which is
the most convenient or cost effective for you.
6.What's your advantage?
1. Top quality product with UL certification. Product sells good in
USA, Europea, Brazil, SEA, Mid East.
2. Good Serivce: Soon reply for quotation. Fast delivery time. firm
packing, excellent after-sales serivce.
3. Powerful technology, advanced facilities, standardized
production management, strict testing methods.