Pleated Dust Collector Filter Bags Polyester Material Hydrolysis
The star filter bag, we can make the polyester star filter bag,
aramid filter bag and so on.
The most popular one is the star polyester filter bag.
1. Operation temperature 150 Deg c,
2. the max surge is 150 deg c.
3. good anti-acid, good anti-alkali ,good hydrolysis stability
4. Mean Air Permeability: 10-15 firstname.lastname@example.orgH2O
5. It is the cheapest filter media in the bag filter filtration
field. Polyester bag filter is the most popular items in the bag
Star filter bag, as its bigger filter area is welcomed by the
Star polyester bag filters Breaking Elongation is less than 20% for
MD and 40% for CMD,low dry shrinkage, can work well in the 130 deg
C. the material is cheaper than other material, so widely used in a
lot of bag house system.
In a reverse air bag house, the dirty air flows from the
inside-to-outside, so that the dust collects on the inside of the
filter bag. The filter bags are tubular, open at the bottom and
connected to a tube sheet. They are supported from the top through
a spring or J-bolt suspension system. The gas flow is reversed to
initiate filter bag cleaning. Anti-collapse rings are sewn onto the
outside of the bags at 3 to 4 foot intervals to prevent total
collapse of the bags during the reverse air cleaning. Filter bags
are cleaned one compartment at a time in the off-line mode.
Star polyester filter bag(pleated filter bag)are made of 100%
filament polyester fiber,after needle punched, singed heat set
calender for the raw polyester filter felt material, then polyester
filter felt can be sewn into polyester filter bags.
Available Finish: singed,calendar,heat set PTFE
Polyester filter bag widely used in mine, limestone, cement, iron
and steel industries,alumina delivery, electrolytic aluminum,