Surface Core Machine Core Drill Rig High Rotary Speed A Felicitous
YDX-800 drilling rig is mainly used in diameter diamond drilling of
metal and nonmetal solid deposit exploration. It can also be used
in carbide bit core drilling. It is used to bore vertical holes as
well as inclined holes, which is also applied in engineering
boreholes of hydrology water wells, petroleum or gas field
exploration, dike & dam cement grouting, tunnel ventilation and
water draining, etc.
YDX-800 Core Drilling Rig, which is one kind of full hydraulic
drive power head model drilling rig, it takes advantage in its high rotary speed, reasonable rotary
speed range, various rotary speed grades and big torque in low
speed. Hence, it’s very suitable for small diameter diamond bit
core drilling. Meanwhile, it can meet the requirements of large
diameter carbide bit core drilling and varieties of engineering
It has a long stroke which is helpful to reduce the rod reversion
frequency, avoid coring block, and improve productivity,It has a
simple structure, a light weight and is convenient to remove, so as
to make the replacement process easily.
Its operation is concentrated, simple, convenient, flexible and
reliable, so as to reduce the labor intensity a lot.
|Drilling depth HQ||550 m|
|Drilling depth NQ||800 m|
|Drilling depth BQ||900 m|
|A stall speed||108 ~ 144 RPM|
|Two stall speed||233 ~ 311 RPM|
|Third gear speed||385 ~ 514 RPM|
|Fourth gear speed||710 ~ 950 RPM|
|Maximum torque||4320 Nm|
|Carry out the process||3500 mm|
|Feeding force||55 kN|
|Pull force||108 kN|
|Main winch lifting force||54 KN|
|Vice winch lifting force||12 KN|
|Power machine power / speed||125kw / 2200 rpm|
|Machine total weight||about 7300 kg (YDX-800L crawler) about 6300 kg (YDX-800T trailer)|
|Mud pump (optional)||BW-250|
|Rig loaded Type||skid / trailer / crawler (based on customer demand)|
1. Full hydraulic control, convenient and flexible operation,
convenient shifting, good ability, saving time and effort.
2. Machine has a higher rotary speed and a felicitous speed range
which has multi steps and large torque in low speed. It can be
applied for small diamond bit core drilling, satisfied for the
large diameter carbide bit core drilling and so on.
3. It is no necessary to have a slope tower when drilling a slope
hole. It can lift the drill rod in one time.
4. The track or crawler chassis make it possible to move by
oneself. It is so convenient and quick that the preparing time can
be enormously shortened.
5. All the equipments of this rig are installed on chassis droved
by diesel power engine.