Nontoxic,Pollution Free,High Transparency BOPP Film Hot Stamping
BOPP film is a very important flexible packaging material, BOPP
film colorless, odorless, tasteless, non-toxic, and has high
tensile strength, impact strength, rigidity, toughness and good
BOPP film surface energy is low, need to conduct corona treatment
before glue or printing.
After corona treatment, BOPP film has good printing adaptability,
can be color printing and get a beautiful appearance, so it is
often used as a composite film surface material.
|Item||BOPP Cigarette Film|
|Material||BOPP||Roll Width||From 180mm to1880mm|
|Typical Thickness||20mic, 21mic, 22mic, 23mic, 25mic||Roll Length||From 100m to 6000m|
|Core Size||1 inch(25.4mm), 3 inch(76.2mm)||Shrinkage Rate||3%-10%|
(mixed width available 500mm,600mm,700mm etc.)
|Sealing Temperature||120 °C|
|Application||cigarette packet sealing, tobacco carton sealing, gift wrapping|
Due to stretching molecular orientation, so this kind of film the
physical stability of the air tightness good mechanical strength,
high transparency and gloss, tough wear-resisting, is currently the
most widely used printing film, generally use thickness is 20 ~ 40
microns, and the most widely used for 20 microns two-way stretch
polypropylene film main drawback is that poor heat sealing, so
generally used as the outer membrane of composite membrane, such as
transparency and polyethylene film composite moisture resistance
strength and stiffness of the printing are ideal, suitable for
holding food dryingAs the surface of the bidirectional tensile
polypropylene film is non-polar, high crystallinity, low surface
free energy, therefore, its poor printing performance, ink and
adhesive adhesion is poor, before printing and composite surface
1.High clarity and gloss
2.High thermal sealing strength
3.Good printability and coating
4.Excellent antistatic and smoothness
5. Excellent properties of dustproof, moistureproof, air resistant;
|Type||PLA film for lamination|
|Security Level||Food grade|
|Width||100 mm ~ 1800 mm|
Are you a manufacturer of packaging materials?
Yes, we are printing and packaging material manufacturer and we
have our own factory which is located in Guangdong,China.
What is your MOQ?
Normally our MOQ is 3 tons,but we can understand different customer
What is your delivery time?
3Tons within 10 days after receiving 30% deposit, it mainly depends
on the quantity of the goods, and the time may be slightly extended
for special product need make new mold.
What is your price term and payment term?
Our price term is EXW, FOB, C&F; and payment term is T/T, L/C
or Western Union, it should be T/T 30% deposit, and balance before