RU Pneumatic Tube Fittings Reducing Union Plumbing Fitting
Pneumatic Air Fitting High Quality Sanmin
Two different methods can be used to cut tubes :
1 . Tube Cuter
2 . Hacksaw
To attain a leak free connection , the tubing must be cut squarely
. A good quality tube cutter with the appropriate blade for the
tubing material is recommended .
Do not try to reduce the time of cutting by taking deep cuts with
each turn the cutter . This will work harden the tube .
The end of the tube must be deburred to avoid damage to the fitting
and to ensure that the rube reaches the bottom of the fitting .
Do not hold the tube in a vise in the place where it will be
inserted into the fitting ( the vise will leave a mark on the tube
that may cause leaks , and might cause ovality ).
Scratches on the tube might cause leaks . it is , therefore ,
important to handle the tube carefully to reduce the risk of leaks
Some Recautions to be taken
1.Tubes must not be dragged on the floor .
2.Tubes must not be dragged out of a tubing rack , especially in
case of large OD tubes
If using copper tubing from a roll , hold the end of the tube and
roll the roll outwards allowing the tubing to lie on a flat surface
Use : This is a “ No- Go ” Gauge and should be used as follows :
Make up to fitting according to the following instructions : 1/4
inch ( 6mm ) , 3/8 inch , 1/2 inch ( 12mm ) – make up 1-1/4 turns
from finger tight . Check gap between nut and body , using the
appropriate sized gauge . If the gauge slides easily into the gap ,
tighten the nut further until gauge can not enter the gap
In applications where severe conditions and high pressure exist ,
we recommend the following installation procedures :
1. Check that the nut is finger tight
2. Insert the tube ( Up to the shoulder )
3. Rotate the nut with a wrench until the tube does not rotate freely
4. Mark position of the nut .
5. Rotate the nut 1-1/4 turns .
This method ensures that even if the tube O.D. is at the minimum
tolerance , the ferrules will be in contact with the tube for the
full 1-1/4 rotation.
In order to assure maximum fitting reliability and performance ,
great care should be given when selecting the tubing for each
Four variables must be considered when ordering tube for use with
2. Tube wall thickness
3. Tube surface finish
4. Tube hardness
Tubing should comply with standard ASTM A213 or ASTM A269 , be
seamless , and fully annealed .
The tube must be red of scratches and suitable for bending and
Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you
can give me the information ,
then we can give you an estimated price is for reference only . We
can do any size and any desgin .
Q: what types of products you can make ?
A: We can make many kinds of stainless steel materials and
brass,aluminum . Valve / solenoid valve / electric valve /
pneumatic valve and air cylinder products and so on .
Q: What ' s your delivery date ?
A: It depends on the number of orders . Delivery date is 7 - 30
days .if small order,pls buy from our aliexpress shop, If you need
emergency products , we can speed up the production of the first
Q: Can the product be made with our logo and brand ?
A: Yes , of course , we can make . we are OEM supplier for years
and professional to make . But you need give us the authorization
Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .
Why choose us
1: Large stock for fast shipping .
2: High quality with competitive price .
3: Provide free products information .
4: Reliable quality assured and active after-sell service
5: Sample order & small quantity order is acceptable .
Fittings hose , Male female brass fitting , Male female fitting ,
Pipe fitting , Pipe fittings plastic , Plastic fitting , Pneumatic
fitting , Push fittings , Quick connect fitting , Quick connecting
, Quick coupling fittings , SS304 , Stainless steel fittings ,
Stainless steel pipe fittings , Tee tube fittings , Threaded
stainless steel fittings , Tube connector , Tube fitting , Pipe
Connection , Pipe Joint , Plasitc Quick , Couplers , Pneumatic
parts , Threaded Union , Fitting pneumatic , Push in fitting , Push
on fitting , Speed Controls , Stop fittings , Quick connecting tube
fitting , Speed Controls , Check Valves , Hand Valves , Ball Valves
, Hand Sliding fitting , Air control valve , Mini fitting , Push -
In Fitting , Transition fitting , Push on fitting , Compression
fitting , 316L Stainless steel fitting