Portable Finger Touch Interactive Whiteboard
- (OWAY FT8 A-L, long focus, projection ratio: 1.34)
After years of innovative research and development, FT8 has become
the main product of the new series of finger touch from OWAY Group
Limited. It is not only more stable but also easier to install and
use. Currently, it uses the world's most advanced laser imaging
technology. The level of automation and stability are far ahead of
Laser Image Calibration Technology
Oway Finger touch portable interactive whiteboards includes with
two parts: emitter and signal receiver. Emitter is fixed on flat
surface. It emits infrared laser curtain on the surface which is
about 1mm thick invisible light and parallel with the projection
screen surface, 1-2mm above the screen surface. When the fingers or
any non-transparent objects touch this virtual surface, the light
will be reflected and detected by the signal receiver. Computer
will figure out the position of the mouse by accurate calculating
the reflected light position.
|FT8 Finger Touch Interactive Whiteboard Specifications|
|Calibration||Automatic(5 seconds) / Manual (4/15 points)|
|Multi-touch||100 points touch,Writing and erasing can be performed simultaneously|
|Filter||Software auto-control, enhance stability.|
|Minimum Active Size||40 inch|
|Max Active Size||150inch( no sunshine room);|
|Technology||Laser Image Calibration Technology|
|Positional Accuracy||±1 Pixel (Resolution: 4096*4096)|
|Ultra short throw: 0.25||installation distance:0.45m|
|Short throw:0.86||installation distance:0.84m|
|Long throw:1.34||installation distance:2.2m.|
|Number of lasers||unit *3|
|Power of Laser Beam||280mw*2|
|Signal refresh rate||120fps|
The sensor and computer are connected by USB Cable; Emitter and
Sensor are wireless; Emitter just need power.
|OS Requirement||Windows XP, Windows 7, Windows 8, Windows10;|
|Package||1. Sensor 2.Emitter 3. IR pen 4.USB cable (10m) 5. Remote 6.Power
Adaptor 7. CD with software|
FT8 is small and easy to install. It doesn’t require professional
technology to install.
Just install the laser emitter in the middle area above the
whiteboard (or flat surface) and put the signal receiver on the
Step by step guided video:
School; company; Shopping mall; Play area; Amusement park; Parties;
Exhibitions ;Company reception Areas etc.
1. High cost performance: Compared with LCD electronic whiteboards, FT8 is more
cost-effective to pay for the product, installation and
maintenance. And the user can enlarge or reduce the projection
screen according to the demand. The LCD Whiteboard does not have
2. Stable performance, not easy to damage: FT8 interactive whiteboard external circuit only power supply wire
and USB interface circuit, eliminating the data exchange circuit of
the LCD panel, and reducing the information processing lines used
for the display screen. It uses the PCB board to concentrate the
circuit on the circuit board, Reduces failure while reducing power
3. Good compatibility: FT8whiteboard is compatible with various software.
4. High stability:Through a variety of anti-abnormal spot interference algorithms and
filter push-pull devices, the system is not easily affected by the
external environment like light and temperature, even if there are
small bugs or dust stuck on the board products can also operate
5. Supports 100-point finger touch (100 people write at the same time
and support Windows drawing software 100 points).
6. The projection area works as a touch panel for windows touch.
7. Max projection Screen:Support 40 - 150inch(Non-sunlight room)
Package & Accessories:
FT8 measurements : 35x22x13cm, gross weight 1.8KG
|Square signal receiver||1|
USB Cable:7 m square line
Product demo on You Tube:
We send items to oversea all over the world by air (DHL/ UPS/
FedEx/ EMS) and by sea, if you have any special service, please
contact us freely at any time. We will reply you back in 24 working
1: About Shipping
1) Package will be shipped within 7 working days after payment is
confirmed, bulk orders maybe delayed more days.
2) Please double check your shipping address, including Postal
Code, Phone Number. If there is any change, please let us know
before making the payment.
3) We will not be responsible for any delay during delivery due to
Custom Clearance of your country and weather condition, etc…
2: About Custom
1) Important information about foreign shipping
If you have any special demand about your custom invoice value or
your country custom requirement, please let us know before
shipment, so we can do our best for you!
2) If there are any import duties, taxes & charges of your
country are not included in the item price or shipping charges.
These charges are the buyer's responsibility, so please check with
your local customs office to confirm what these additional costs
3: After Service
1) If the items have any production problem, it can be exchange
within 7 days of delivery, and all items must be returned in their
original condition, buyer must pay return shipping fee for items,
while the seller will pay resend shipping fee.
2) We do not allow any return without first requesting an order
number & contacting us.
1. Please kindly tell us what is the BEST Value to declare for the
package.So that you can avoid to pay high tax or pay less.
2. If you are from Brazil / Peru ,Please leave your CPF number or
tax number on the order so that it's easier for you to get your
package! DHL is not a good way to be used in Brazil.
Attention For Russian Clients:
1. Please fill in your full name including your first name, middle
name and last name when making the payment.
2. Please fill in your correct address including your Apartment
No., Street, City, Region and country.
Otherwise post office would not deliver your package in Russian !
Oway Group Limited
Mobille/Whatsapp /Wechat /Skype: +86- 170 96731211