Full Automatic Static Steam Hot Water Spray Retort Machine
This kind of retort sterilizer is suitable for various of heat
resistant packages and we strongly recommend you to buy this type.
1. Glass container: glass jar, glass bottle
2. Metal container: tin can
3. Plastic container: PP bottle, HDPE bottle
4. Soft package: Aluminum foil bag, transparent bag, vacuum bag,
retort pouches, doy-packs ect.
A. Suitable for all heat resistant package material including glass
B. Safety interlock Device for quick closure of retort, to ensure
the safety of operator;
C. Quick heating, only need about 6-12 minutes to reach the
D. Uniform heat distribution, no blind angle;
E. Adopting the multi-phase process for rising and dropping of
temperature, minimize the temperature difference between the
surface and center of packed food, maintain the flavor and
nutrition of food. Mild heating and cooling process can protect the
fragile container and glass container;
F. Direct heating by steam and indirect cooling by continually
recycling the water through the heat exchanger, avoiding secondary
contamination to the food package;
G. Employing soft water for sterilization to avoid pollution to the
surface of package; no special requirements for cooling water which
reduce the cost of sterilization;
H. Siemens PLC automatic control system and touch screen, easy to
I. Pressure control system can adjust the pressure in the tank
automatically and precisely in case the packages break or
deformation during sterilization process;
J. Monitoring temperature ensures food safety, saves energy,
reduces production time and assists in providing the best quality
K. System will make alarm calls automatically when the temperature,
the pressure, the water level, or any other kinds of error occur.
First filling the retort with a small amount of process water and
the water level is maintained below the basket bottom level. Then
the process water is drawn from the bottom of the retort by a high
capacity circulation pump and spray from nozzles located along the
top and sides of the retort.
Simultaneously the steam valve opens and the steam is introduced
into the retort through the steam spreader on the bottom of the
retort directly heating those process water spraying from nozzles
and making the temperature inside retort evenly.
And when the temperature inside retort reaches the programmed
sterilization temperature, it will be kept during the sterilization
process. At the same time the pressure in the retort also will be
kept by adding or venting compressed air as needed. Finally the
cooling water through heat exchanger will continually make those
sterilization water cool down until the sterilization process is
|Model No.||Outside Dimension(mm)||Inner Dia|
|Max Working Pressure|
|Max Working Temperature|
Those retort sterilizers in the chart are standard configurations.
We also can customize the retort machine according to your specific
requirements or your drawing.
Some Retort Accessories
Retort Flaw Detection
Water Pressure Test
Retort Full Flow Chart
We will deliver your goods by LCL/20'FCL/40'FCL depending on your
Before delivery, our professional technician will do trial run for
each product to check until everything is functional, you also can
come to our factory and test our machine together with us.
When loading, our workers will fix the retorts tightly with wire
rope so that the retorts can't move in the container.
If you are interested in our products want to consult us, you can
freely call us or send us Email at any time, we will be very glad
to serve you. Welcome to visit our factory in Zhucheng City of