Panels and base frame are made from galvanized steel
protected with polyester powder painting to ensure total
resistance to atmospheric agents.
Single phase rotary type (mod. 05 only) and 3-phase scroll
compressor (mod.08÷30), with thermal overload cut-out and
crankcase heater mounted on rubber vibration isolators.
External rotor type axial fans, equipped with single phase
direct drive motors, low noise 6 poles, protection level IP54,
provided with a protective outlet grille.
High efficiency tube in tube heat exchanger, factory
insulated with flexible close cell material.
Coils are consisting of seamless copper tubes mechanically
expanded into blue hydrophilic aluminum fins, protected with
flexible plastic grill.
High efficiency stainless steel brazed plate heat exchanger,
factory insulated with flexible close cell material. (optional)
Copper tube connection with charge valve, filter, sight glass,
gas-liquid separator, thermostatic expansion valve, low
pressure switch with automatic reset, high pressure switch
with manual reset.
The heat pump unit is completed also with 4-way valve,
liquid receiver and one way valve.
Water circuit comes complete with
Built with air vent valve, water drain connection, and
Compressor protection breaker;
Fan motor protection breaker;
Control circuit protection breaker;
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
Additional electric heater embedded in the coils for
defrosting in low temperature ambient. It must be factory
Stainless steel covering